Table of Contents
Advertisement
AC2000 802.11ac Wireless Access Point/Router WAC124
access point/router. If you do not know the IP address, see Find the IP address
of the access point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to
sign in with the local login credentials (see Log in to the access point/router when
it is not connected to the Internet on page 27).
c. Click the Login button.
The NETGEAR Account Login page displays.
d. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
e. Select ADVANCED > USB Storage > ReadySHARE > Media Server.
The Media Server (Settings) page displays.
f. Select the Enable iTunes Server (Music Only) check box.
g. Click the Apply button.
Your settings are saved.
h. Enter the passcode that displays in the Remote app.
i. Click the Allow Control button.
Your settings are saved.
Your iPhone or iPad pairs with the access point/routerand the iTunes server is
ready. The access point/router displays in the Remote app.
8. In the Remote app, tap the access point/router that your iPhone or iPad is connected
to.
The music that is on the USB device that is connected to the access point/router
displays in the Remote app.
Use the Access Point/Router as
a Media Server
195
User Manual
Advertisement
Table of Contents
