NETGEAR WAC124-100NAS User Manual page 234

AC2000 802.11ac Wireless Access Point/Router WAC124
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
4. Click the Login button.
The NETGEAR Account Login page displays.
5. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
6. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
7. Make sure that the Port Forwarding radio button is selected.
8. Click the Add Custom Service button.
The Ports - Custom Services page opens.
9. Set up a new port forwarding rule for a custom service or application by specifying
the following settings:
• Service Name. Enter the name of the custom service or application.
• Service Type. Select the protocol (TCP or UDP) that is associated with the service
or application. If you are unsure, select TCP/UDP.
• External port range. If the service or application uses a single port, enter the
port number in the External port range field. If the service or application uses
a range or ranges of ports, specify the range in the External port range field.
Specify one range by using a dash between the port numbers. Specify multiple
ranges by separating the ranges with commas.
• Internal port range. Specify the internal port or ports by one of these methods:
- If the external and internal port or ports are identical, leave the Use the same
port range for Internal port check box selected.
- If the service or application uses a range or ranges of ports, clear the check
box and specify the range in the Internal port range field. Specify one range
by using a dash between the port numbers. Specify multiple ranges by
separating the ranges with commas.
Router Mode: Manage Port
Forwarding and Port Triggering
234 User Manual