Table of Contents
Advertisement
AC2000 802.11ac Wireless Access Point/Router WAC124
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select ADVANCED > Administration > NTP Settings.
The NTP Settings page displays.
6. From the Time Zone menu, select the time zone for the area in which the access
point/router operates.
7. If the access point is in an area that observes daylight saving time, select the
Automatically adjust for daylight saving time check box.
8. Click the Apply button.
Your settings are saved.
When the access point/router connects over the Internet to an NTP server, the date
and time that display on the page are adjusted according to your settings.
Change the NTP server
By default, the access point/router uses the NETGEAR NTP server to synchronize the
network time. You can change the Network Time Protocol (NTP) server to your preferred
NTP server.
To change the NTP server to your preferred NTP server:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
Maintain and Monitor the Access
Point/Router
145
User Manual
Advertisement
Table of Contents
