Table of Contents
Advertisement
AC2000 802.11ac Wireless Access Point/Router WAC124
Your settings are saved.
12. To approve another USB storage device, first click the Safely Remove USB Device
button for the currently connected USB storage device, and remove that device.
For more information, see Safely remove a USB storage device on page 188.
Then, connect the other USB storage device, and repeat this procedure.
Safely remove a USB storage device
Before you physically disconnect a USB storage device from the access point/router
USB port, log in to the access point/router and take the USB storage device offline.
To remove a USB storage device safely:
1. Open a web browser from a computer or mobile device that is connected to the
access point/router network.
2. Enter http://www.routerlogin.net in the address field.
If you are not connected to the access point/router network but to the same network
as the access point/router, enter the IP address that is assigned to the access
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select BASIC > ReadySHARE.
The USB Storage (Basic Settings) page displays.
6. In the Available Network Folders sections, select the USB storage device.
Note: By default, the USB storage device that is connected is selected. We
recommend that you do not attach more than one USB storage device the USB port
(for example, through a USB hub).
Share a USB Storage Device
Attached to the Access
Point/Router
188
User Manual
Advertisement
Table of Contents
