NETGEAR WAC124-100NAS User Manual page 147

AC2000 802.11ac Wireless Access Point/Router WAC124
point/router. If you do not know the IP address, see Find the IP address of the access
point/router on page 29.
The NETGEAR Business page displays. You are prompted to sign in with your
NETGEAR account.
If the access point/router is not connected to the Internet, you are prompted to sign
in with the local login credentials (see Log in to the access point/router when it is
not connected to the Internet on page 27).
3. Click the Login button.
The NETGEAR Account Login page displays.
4. Enter your registered email address and password and click the Login button.
The BASIC Home page displays.
5. Select ADVANCED > Administration > Logs.
The Logs page displays.
6. Select the check boxes that correspond to the activities that you want to be logged.
By default, all check boxes are selected, and the following activities are logged:
• Attempted access to allowed sites
• Attempted access to blocked sites and services
• Connections to the local browser interface of the access point/router
• Access point/router operations such as startup, getting the time, and so on
• Known DoS attacks and port scans
• Port forwarding and port triggering
• WiFi access
• ReadySHARE access
• VPN service
7. Clear the check boxes that correspond to the activities that you do not want to be
logged.
8. Click the Apply button.
Your settings are saved.
Maintain and Monitor the Access
Point/Router
147 User Manual