Specify A Custom Ntp Server - NETGEAR WAX628 User Manual

Insight Managed WiFi 6 AX5400 Access Point Model WAX628
Use the following guidelines:
• The name must contain alphanumeric characters, can contain hyphens, and
cannot be longer than 15 characters.
• The name cannot start or end with a hyphen.
• The name must contain at least one alphabetical character.
6. Click the Apply button.
Your settings are saved.

Specify a custom NTP server

By default, the access point receives its time from a default NETGEAR Network Time
Protocol (NTP) server, but you can also specify a custom NTP server.
To specify a custom NTP server:
1. Launch a web browser from a computer that is connected to the same network as
the access point or directly to the access point through an Ethernet cable or WiFi
connection.
2. Enter the IP address that is assigned to the access point.
A login window displays.
If your browser displays a security warning, you can proceed, or add an exception
for the security warning. For more information, see What to do if you get a browser
security warning on page 42.
3. Enter the access point user name and password.
The user name is admin. The password is the one that you specified. The user name
and password are case-sensitive.
If you previously added the access point to a NETGEAR Insight network location and
managed the access point through the Insight Cloud Portal or Insight app, enter the
Insight network password for that location. For more information, see Connect over
WiFi using the NETGEAR Insight app on page 24.
The Dashboard page displays.
Manage and Maintain the Access
Point
154 User Manual