Figure 24 Adding a Partition
Quantum DX3000 and DX5000 User's Guide
To add a partition:
To add, edit, or delete a partition, the system must be offline.
Note:
1 Set the DX3000/DX5000 system to the off-line state (see
Library State"
on page 84).
2 From the
Partition
The
Add Partition
3 Enter a partition name that identifies it so it can be distinguished
from other partitions on the DX3000/DX5000 system.
The partition name is independent of the host name in the
Note:
Network
Chapter 3 DX3000 and DX5000 Remote Management
page, click
to add a partition to the system.
Add
page displays (see
figure
tab (see
"Configuring the Network"
Configuration
"Changing
24).
on page 44).
37