Introduction - Challenge Spartan 185AEP Operator's Manual

Electronic programmable cutter
Table of Contents

Advertisement

1.0 Introduction

1.0 Introduction
THIS MANUAL is designed to help you get the most from your Challenge equipment. Keep this
manual in a safe, convenient place for quick reference by operators and service personnel.
instructions! Pay special attention to the instructions in bold type. Personal injury may result if the
precautions are not read and followed.
READ THIS MANUAL BEFORE OPERATING! Follow precautions and instructions. If after reading
the manual questions still remain, contact your Authorized Challenge Dealer.
Take a few minutes right now to RECORD YOUR MACHINE SERIAL NUMBER in the space
provided on the front cover of this manual. Also be sure to fill out the warranty card accompanying
your machine and return it DIRECTLY TO CHALLENGE.
If you bought a used machine, it is important to have the following information on record at Challenge.
Copy this page, fill in the information and send it care of The Challenge Service Department, 6125
Norton Center Drive, Norton Shores MI. 49441.
CHALLENGE MODEL
ATTN
ADDRESS
CITY
PHONE
DEALER NAME & CITY
It is very important that you read and understand the conditions outlined in the Warranty Information
Sheet attached to the outside of the shipping container of your machine.
The Warranty Information Sheet must be filled out completely and returned to THE CHALLENGE
MACHINERY COMPANY in order for the warranty to be issued for this machine.
Challenge® is a registered trademark of The Challenge Machinery Company• 6125 Norton Center Drive• Norton Shores MI.
49441 Copyright© 2006 by The Challenge Machinery Company. All rights reserved. Printed in the U.S.A
2
SAFETY ALERT! This symbol means CAUTION: Personal safety
SERIAL NUMBER
COMPANY
STATE/PROVINCE
DATE INSTALLED
* WARRANTY INFORMATION *
ZIP

Advertisement

Table of Contents
loading

Table of Contents