Clearing Bios Settings (Nvram) - NEC EXP801 Maintenance Manual

Chapter 1 Maintenance
7.4

Clearing BIOS Settings (NVRAM)

To recover the BIOS settings to the factory settings (clearing NVRAM), use the jumper switch.
You can also clear the password of BIOS Setup Utility (SETUP) by using the jumper switch.
To clear the password or the NVRAM, use the corresponding jumper switch illustrated in the figure below.
46
Tips
Usually, use BIOS Setup Utility (SETUP) to recover the settings to the factory
settings (Load Setup Defaults).
Important
Do not change any other jumper switches. Any change will cause the server
to fail or malfunction.
NVRAMクリアジャンパー
Clear NVRAM Jumper
保持（工場出荷時）
Protect (factory-setting)
Clear
クリア
Express5800/R120g-1M, R120g-2M Maintenance Guide
7. Resetting and Clearing the Server
Clear Password Jumper
パスワードクリアジャンパー
保持（工場出荷時）
Protect (factory-setting)
クリア
Clear