NEC EXP801 Maintenance Manual page 157

Table of Contents

Advertisement

Chapter 3 Appendix
Microsoft-Windows-Time-S
ervice
134
When installing an OS, starting system,
or applying Starter Pack
disk
153
When creating logical drive by Universal
RAID Utility
SNMP
1500
When installing an OS
Service Control Manager
7023
When installing an OS
Service Control Manager
7023
When starting an OS or shutting down
an OS
Service Control Manager
7030
When installing an OS
Microsoft-Windows-
DistributedCOM
10010
When installing an OS
NtpClient was unable to set a manual peer to use as a time source
Warning
because of a DNS resolution error on 'time.windows.com,0x9'. NtpClient
will try again in 15 minutes and double the reattempt interval thereafter.
If it is not registered after connecting to the Internet, there is no problem
with system operation.
The I/O operation at the logical block address for disk was retried.
• The on-screen indication may differ depending on system
Warning
environment.
• The character string of this event may not be displayed correctly,
however, it does not affect the system operation.
If this event is logged when creating a logical drive by Universal RAID
Utility, there is no problem in system operation.
The character string of the event will be correctly displayed by applying
the Microsoft's update program on the following site:
http://support.microsoft.com/kb/2925479
The SNMP Service encountered an error while accessing the registry
key
Error
SYSTEM\CurrentControlSet\Services\SNMP\Parameters\TrapConfigur
ation.
If this event is logged only when SNMP is enabled and does not occur
repeatedly, there is no problem with system operation.
Go to the following Microsoft website for details.
http://support.microsoft.com/kb/2002303/
The Network List Service terminated with the following error:
Error
The device is not ready.
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
The WMI Performance Adapter service terminated with the following
Error
error: The error cannot be identified.
Ignore this error because there is no impact on the system.
Printer Extensions and Notifications service is marked as interactive
Error
service. However, the system is not allowed to use interactive service.
Thus, this service might not work correctly.
If this event is logged only when installing an OS and does not occur
repeatedly, there is no problem in system operation.
The server {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} did not register in
Error
DCOM within the necessary timeout period.
For details, refer to the following website:
http://support.microsoft.com/kb/956479/ja
Express5800/R120g-1M, R120g-2M Maintenance Guide
2. List of Windows Event Logs
(Japanese only)
157

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r120g-2mExpress5800/r120g-1mExp802

Table of Contents