Table of Contents
Advertisement
Chapter 2 Useful Features
i. MAC [XX:XX:XX:XX:XX:XX] submenu
Option
iSCSI Attempt Name
iSCSI Mode
Internet Protocol
Connection Retry Count
Connection Establishing
Timeout
OUI-format ISID
Configure ISID
Enable DHCP
Initiator IP Address
Initiator Subnet Mask
Gateway
Get target info via DHCP
Target Name
80
Parameter
Up to 96 Alphanumeric
Specify an attempt name of iSCSI.
characters
[Disabled]
Specify iSCSI mode.
Enabled
Enabled for MPIO
[IP4]
Specify IP mode of iSCSI.
IP6
Autoconfigure
0-[5]-16
Specify the retry count for iSCSI connection.
100-[16000]-20000
Specify the timeout time in msec for iSCSI connection.
(Display only)
Displays the OUI-format ISID.
6-digit numerics
Specify the lower 3 bytes of the OUI-format ISID. The MAC
address is stored by default.
[Disabled]
Enable or disable the DHCP server.
Enabled
IP Address
Specify the IP address of the initiator. This item is not displayed
when "Enabled" is selected for Enable DHCP or "IP6" is
selected for Internet Protocol.
IP Address
Specify subnet mask of initiator. This item is not displayed when
"Enabled" is selected for Enable DHCP.
IP Address
Specify a gateway. This item is not displayed when "Enabled" is
selected for Enable DHCP.
[Disabled]
Enable or disable the feature to obtain information of the target
Enabled
device via the DHCP server. This item is not displayed when
"Disabled" is selected for Enable DHCP.
Alphanumeric
Specify the target name with IQN (iSCSI Qualifier) format. This
characters between 4
item is not displayed when "Enabled" is selected for Get Target
and 223
info via DHCP.
Express5800/R120g-1M, R120g-2M Maintenance Guide
1. System BIOS
Description
Advertisement
Table of Contents
