Vecow RCS-9000 User Manual page 78

2.3.4 SYS_FAN1, SYS_FAN2
The fan power connector is for additional thermal requirements. The pin
assignments of SYS_FAN1 and SYS_FAN2 are listed in the following table:
Pin No.
1
2 +12V (up to 2A)
3 1
6 4
2.3.5 BAT1 : Battery
The RCS-9000's real-time clock is powered by a lithium battery. It is equipped
with Panasonic BR2032 190mAh lithium battery. It is recommended that you do
not replace the lithium battery on your own. If the battery needs to be changed,
please contact the Vecow RMA service team.
3 1
6 4
Function
GND
BAT1
FAN1
FAN2
Pin No. Function
3 Fan speed sensor(Input)
4 Fan speed sensor(ouput)
GETTING TO KNOW YOUR RCS-9000 69