Table of Contents
Advertisement
4.3.2 Power & Performance
4.3.2.1 CPU – Power Management Control
Boot performance mode
Select the performance state that the BIOS will set before OS handoff.
Intel(R) SpeedStep(tm)
Allows more than two frequency ranges to be supported.
Intel(R) Speed shift Technology
Enable/Disable Intel
CPPCv2 interface to allow for hardware controlled P-states.
Turbo Mode
Turbo Mode.
C states
Enable or disable CPU C states.
Enhanced C-states
Enable/disable C1E. When enabled, CPU will switch to minimum speed when
all cores enter C-State.
Thermal Save Mode
Enable/Disable Thermal Save Mode support.
©Vecow RCS-9000 User Manual
Figure 4-3-2: Power & Performance
Figure 4-3-2-1: CPU – Power Management Control
®
Speed Shift Technology support. Enabling will expose the
BIOS AND DRIVER SETTING
120
Advertisement
Table of Contents
