Table of Contents
Advertisement
4.5.1 HDD Security Configuration
Set User Password
Set HDD user password.
*** Advisable to power cycle system after setting hard disk passwords ***
Discard or save changes option in setup does not have any impact on HDD
when password is set or removed. If the 'Set HDD User Password' option is
gray, do power cycle to enable the option again.
4.5.2 Security Boot
Attempt Secure Boot
Secure Boot activated when Platform Key (PK) is enrolled, System mode is
User/Deployed, and CSM function is disabled.
Secure Boot Mode
Secure Boot mode selector Standard/Custom.
In custom mode Secure Boot Variables can be configured without authentication
Key Management
Enables expert users to modify Secure boot policy variables without full
authentication
Figure 4-5-1: HDD Security Settings
Figure 4-5-2: Security Boot Settings
BIOS AND DRIVER SETTING
135
Advertisement
Table of Contents
