Table of Contents
Advertisement
2.2.2 Power Button
COM 4
DC-IN
COM 1
V -
V+
IGN
On | Off
COM 2
The power button is a non-latched switch with dual color LED indication. It
indicates power statuses: S0, S3 and S5. More details on the LED indications
are listed in the following chart:
LED Color
Power Status
Solid Blue
S0
Solid Orange
S3, S5
To power on RCS-9000, press the power button which will light the blue LED.
To power off RCS-9000, you can either command shutdown by OS operation
or simply press the power button. If system error appears, press and hold the
power button for four seconds to shut down the machine directly. Please do note
that a four-second interval between each two power-on/power-off operation is
necessary in normal working status. (For example, once turning off the system,
you have to wait for four seconds to initiate another power-on operation).
2.2.3 DVI-D Connector
COM 4
DC-IN
COM 1
V -
V+
IGN
On | Off
COM 2
This connector can output DVI signals. The DVI output mode supports up to
1920x1200 resolution. The DVI mode is automatically selected according to
the display device connected. You will need a DVI cable when connecting to a
display device.
COM 3
Isolated
DIO 2
DVI-D
DP
DVI-I
System Status
System working
Suspend to RAM, System off with standby power
COM 3
Isolated
DIO 2
DVI-D
DP
DVI-I
GETTING TO KNOW YOUR RCS-9000
Isolated
DIO 1
SIM 2
SIM 3
| LAN 2
| LAN 1
Isolated
DIO 1
SIM 2
SIM 3
| LAN 2
| LAN 1
RST
RST
57
Advertisement
Table of Contents
