Appendix B : Software Functions - Vecow RCS-9000 User Manual

B

APPENDIX B : Software Functions

B.1 Driver API Guide
In Runtime folder, on RCS9K2.h:
_DLL_IMPORT_ definition is used on LoadLibrary API for RCS9K.dll.
RCS9K_EXPORTS definition is used on RCS9K.dll building.
Otherwise, that is used to compile with RCS9K.lib
BOOL Initial(BYTE Isolate_Type, BYTE DIO_NPN)
Initial machine for DIO, watchdog timer, and POE
Isolate_Type: DIO type
1: Isolated DIO;
0: Non-Isolated DIO
DIO_NPN: DI / DO type
1: PNP (Source) mode for European rule;
0: NPN (Sink) mode forJapanese rule
Return:
TRUE (1): Success;
FALSE (0): Fail (Driver not exists, or initial error (version is too old, or
machine not match))
BOOL GetDIO1Config(BYTE *Isolate_Type, BYTE *DI_NPN, WORD *Mask)
BOOL GetDIO2Config(BYTE *Isolate_Type, BYTE *DI_NPN, WORD *Mask)
Get DIO configuration( by variable)
Isolate_Type: DIO type
1: Isolated DIO;
0: Non-Isolated DIO (DIO1 is the same as GPIO)
DI_NPN ([7:0]): DI type, pin setting by hexadecimal bitmask
1: PNP (Source) mode for European rule;
0: NPN (Sink) mode for Japanese rule
DO_NPN: DO type
1: PNP (Source) mode for European rule;
0: NPN (Sink) mode for Japanese rule
Mask ([15:0]): In / Out, pin setting by hexadecimal bitmask
1: Output;
0: Input
Return:
TRUE (1): Success;
FALSE (0): Fail (Initial error, or call by pointer error, or hardware
problem)
Appendix B
143