Table of Contents
Advertisement
Chapter 2 Preparations
7.
Connect the interface cables and power cable to the hard disk drive. Use the interface cables that
come with the HDD cage. For details about cable connection, see 1.16 Connecting Cables.
1.12.2
Removing the 3.5-inch fixed hard disk drives
Remove the 3.5-inch fixed hard disk drives from the HDD cage by using the following procedure.
1.
See steps 1 to 3 in Chapter 2 (1.3 Overview of Installation and Removal) for preparations.
2.
To remove the side cover and front bezel, see Chapter 2 (1.4 Removing the Side Cover and 1.5
Removing the Front Bezel).
3.
Disconnect the power cable and interface cable from the hard disk drives.
4.
Press the part shown in the figure to unlock the HDD tray, and then remove the hard disk drive out
from the HDD cage.
Important
When disposing of the hard disk drives, follow the instructions described in
Chapter 1 (1.2 Disposal of consumables and servers) in the Maintenance
Guide.
Express5800/T110g-E User's Guide
1. Installing Internal Optional Devices
79
Advertisement
Table of Contents
