Table of Contents
Advertisement
Chapter 2 Preparations
Adding a RAID controller (N8103-172/173/174/171)
Power
supply
Motherboard
0-3
RAID controller
miniSAS cable
Battery cable
LED cable
About RAID LED cables
The DISK access LED on the front of the equipment shows the access status of hard disk drives that are
connected to a RAID controller. To display this status, connect the LED cable that comes with the optional
cable K410-293(00) or K410-316(00).
Connect the LED connector on the motherboard to the connector on the RAID controller.
See the figures below and connect the LED cable to the LED connector of the motherboard.
Motherboard
0
1
2
3
HDD_LED1
Tips
The dedicated cable K410-293(00) is required for installing the RAID controller
(N8103-172/173/174) in the server.
The dedicated cable K410-316(00) is required for installing the RAID controller
(N8103-171) in the server.
LED connector
Express5800/T110g-E User's Guide
1. Installing Internal Optional Devices
HDD cage
Extra
battery
To the motherboard side
99
Advertisement
Table of Contents
