Removing The 3.5-Inch Fixed Hard Disk Drives - NEC Express5800 Series User Manual
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.11.2
Removing the 3.5-inch fixed hard disk drives
Remove the 3.5-inch fixed hard disk drives from the HDD cage by using the following procedure.
1.
See steps 1 to 3 in Chapter 2 (1.2 Overview of Installation and Removal) for preparations.
2.
To remove the side cover and front bezel, see Chapter 2 (1.3 Removing the Side Cover and 1.4
Removing the Front Bezel).
3.
Disconnect the power cable and interface cable from the hard disk drives.
4.
Press the part shown in the figure to unlock the HDD tray, and then remove the hard disk drive out
from the HDD cage.
Important
When disposing of the hard disk drives, follow the instructions described in
Chapter 1 (15 Transfer, movement, and disposal) in Safety Precautions and
Regulatory Notices.
Express5800/T110i User's Guide
1. Installing Internal Optional Devices
63
Advertisement
Table of Contents
