Table of Contents
Advertisement
Chapter 1 General Description
4.5.6
LINK/ACT LED (
This LED indicates the status of the LAN port.
The following table lists LINK/ACT LED patterns.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
4.5.7
SPEED LED (
This LED indicates which network interface is used.
Two onboard LANs (
Management LAN (
The following table lists LINK/ACT LED patterns.
SPEED LED pattern
On (amber)
On (green)
Off
4.5.8
AC POWER LED
When an optional redundant power supply unit is installed, an AC POWER LED is added to the unit.
The following table lists AC POWER LED patterns and their meanings.
LED status
On (green)
Flashing (green)
On (amber)
Flashing (amber)
1,
2,
M)
The server is connected with network correctly.
The server is accessing network.
The server is disconnected from network.
1,
2,
M)
1,
2) support 1000BASE-T, 100BASE-TX, and 10BASE-TX.
M) supports 100BASE-TX and 10BASE-TX.
The port is operating with 1000BASE-T interface.
The port is operating with 100BASE-TX interface.
The port is operating with 10BASE-T interface.
Condition
The server is on.
AC power is being supplied via the
power cord.
Cold redundancy is enabled.
A redundant power supply system is
configured and a power cord is only
connected to one of the power supply
units.
The power supply unit is broken.
The power supply unit is broken.
Express5800/T110g-E User's Guide
4. Names and Functions of Parts
Description
Description
Description
Connect the power cord to the other power
supply unit.
Contact your sales representative.
41
Advertisement
Table of Contents
