Toyotomi CTN/CTG-328W User Manual page 6

All wires of indoor unit and outdoor unit should be connected by
a professional.
Unstable power supply or incorrect wiring may result in electric
shock, fi re hazard or malfunction. Please install proper power
supply cables before using the air conditioner.
The grounding resistance should comply with national electric
safety regulations.
Air Conditioner should be properly grounded. Incorrect
grounding may cause electric shock.
Do not put through the power before fi nishing installation.
Do install the circuit breaker. If not, it may cause malfunction.
An all-pole disconnection switch having a contact separation of
at least 3mm in all poles should be connected in fi xed wiring.
Including a circuit break with suitable capacity, please note the
following table. Air switch should be included magnet buckle
and heating buckle function, it can protect the circuit-short and
overload.
Circuit breaker should be included magnet buckle and heating
buckle function. It can protect the overload and circuit short.
CAUTION
Installation
Instructions for installation and use of this product are provided
by the manufacturer.
Select a location which is out of reach for children and far away
from animals or plants. If it is unavoidable, please add the fence
for safety purpose.
The indoor unit should be installed close to the wall.
Don't use unqualifi ed power cord.
If the length of power connection wire is insuffi cient, please
contact the supplier for a new one. Avoid extending the wire by
yourself.
GB
6