Toyotomi CTN/CTG-328W User Manual page 29

Phenomenon
No air emitted from indoor
unit
Air conditioner can't
operate
Mist is emitted from indoor
unit's air outlet
Odours are emitted
Set temperature can't be
adjusted
Check items
Air inlet or air outlet of in-
door unit is blocked?
Under heating
indoor temperature
reached to set tempera-
ture?
Heating mode is turned on
just now?
Power failure?
Is plug loose?
Air switch trips off or fuse
is burnt out?
Wiring has malfunction?
Unit has restarted immedi-
ately after stopping opera-
tion?
Whether the function set-
ting for remote controller is
correct?
Indoor temperature and
humidity is high?
Whether there's
source, such as furniture
and cigarette, etc.
Your required temperature
exceeds the set tempera-
ture range?
29
Solution
Eliminate obstacles.
mode,
After reaching to set tem-
is
perature, indoor unit will
stop blowing out air.
In order to prevent blowing
out cold air, indoor unit will
be started after delaying
for several minutes, which
is a normal phenomenon.
Wait until power recovery.
Reinsert the plug.
Ask professional to re-
place air switch or fuse.
Ask professional to re-
place it.
Wait for 3min, and then
turn on the unit again.
Reset the function.
Because indoor air is
cooled rapidly. After a
while, indoor temperature
and humidity will be de-
crease and mist will disap-
pear.
odour
Eliminate
source. Clean the fi lter.
Set temperature range:
16°C~30°C.
the odour
GB