Toyotomi CTN/CTG-328W User Manual page 13

Introduction for buttons on remote controller
NOTE
• This is a general remote controller, used for the air conditioner with
multifunction. For the functions which the model doesn't have, if press
the corresponding button on the remote controller, the unit will keep the
original running status.
• After putting through the power, the air conditioner will give out a sound.
Power indicator « » is ON. After that, you can operate the air conditioner
by using remote controller.
• Under on status, pressing the button on the remote controller, the signal
icon « » on the display of remote controller will blink once and the air
conditioner will give out a «di» sound, which means the signal has been
sent to the air conditioner.
ON/OFF
button
Press this button to turn on the unit. Press this button again to turn off the unit.
MODE
button
Press this button to select your required operation mode.
• When selecting auto mode, air conditioner will operate automatically
according to the sensed temperature. Press «FAN» button can adjust fan
speed. Press «
• After selecting cool mode, air conditioner will operate under cool mode.
Press « + » or « - » button to adjust set temperature. Press «FAN» button
to adjust fan speed. Press «
• When selecting dry mode, the air conditioner operates at low speed under
dry mode. Under dry mode, fan speed can't be adjusted. Press «
button to adjust fan blowing angle.
• When selecting fan mode, the air conditioner will only blow fan, no cooling
and no heating. Press «FAN» button to adjust fan speed. Press «
button to adjust fan blowing angle.
• When selecting heat mode, the air conditioner operates under heat mode.
AUTO COOL DRY
/ » button can adjust fan blowing angle.
/ » button to adjust fan blowing angle.
13
HEAT
FAN
/ »
/ »
GB