Toyotomi CTN/CTG-328W User Manual page 20

If energy-saving function has been set under cool mode, press «SLEEP»
button will cancel energy-saving function. If sleep function has been set
under cool mode, start up the energy-saving function will cancel sleep
function.
Child Lock Function
Press ''ON/OFF'' and ''-'' buttons simultaneously to turn on or turn off child
lock function. When child lock function is on, «
controller. If you operate the remote controller, the «
times without sending signal to the unit.
8°C Heating function
Under heating mode, set temperature to 8°C to turn on 8 °C heating function.
The air conditioner keeps the heating status at 8°C.
NOTE:
• Under 8°C heating function,fan speed is defaulted at auto speed and it can't
be adjusted.
Temperature Display Switchover Function
Under OFF status, press « - « and «MODE» button simultaneously to switch
temperature display between °C and °F.
Indoor ambient temperature or humidity display
By holding « On/Off « and « » buttons simultaneously, you can see indoor
ambient temperature or indoor ambient humidity on indoor unit's display. The
setting on remote controlleris selected circularly as below:
When selecting «
unit displays indoor ambient temperature.
When selecting «
unit displays indoor ambient humidity.
NOTE
The ambient humidity value is only for reference. Eg:
If humidity value is «0%», there may be malfunction for the humidity detection
» with remote controller, temperature indicator on indoor
» with remote controller, temperature indicator on indoor
20
» icon is displayed on remote
»icon will blink three
blank
No Setting
GB