Toyotomi CTN/CTG-328W User Manual page 16

Wall mounted air conditioner inverter type
Hide thumbs Also See for CTN/CTG-328W:
Table of Contents

Advertisement

Available languages

Available languages

by 5% from 40%-80%, and adjust by pressing «+» and «-» buttons). Under
this dehumidifi cation mode, set humidity will appear fi rst for 5s and then set
temperature.
By pressing «Humidity Control» button on remote controller twice, the unit
will enter into «Smart Dehumidifi cation» mode, working at optimal comfortable
humidity range under different temperatures according to the pre-set program.
Under this dehumidifi cation mode, «
and «AO» appears on the display of indoor units for 5s. Humidity control is not
adjustable while temperature is.
Under «Dry Mode»:
humidity control with
dehumidifi cation mode
By pressing «Humidity Control» button «
unit will enter into «Manual Dehumidifi cation» mode. Both humidity (30~70%)
and temperature can be set independently. (Setting method: increase by
5% from 30%-70%, and adjust by pressing «+» and «-» buttons). Humidity
is adjustable while temperature is not. Under this dehumidifi cation mode, set
humidity will appear. By pressing «Humidity Control» button «
controller twice, the unit will enter into «Continuous Dehumidifi cation» mode,
keeping dehumidifi cation until room temperature reach below 16ºC degrees.
Under this dehumidifi cation mode, «CO» icon will appear on both remote
controller and display of indoor units. Both humidity control and temperature
can NOT be adjusted.
NOTE
The air conditioner is mainly used for controlling the temperature, while
the humidity control is the auxiliary function. The humidity will be affected
by the factors such as indoor and outdoor environment, degree of indoor
sealing and indoor fl ow.
When the set humidity is higher than current atmospheric humidity, the set
humidity can't be reached.
LR-swing button
Press this button can select left & right swing angle. Fan blow angle can be
selected circularly as below:
continuous dehumidifi cation
with dehumidifi cation mode
no display
(stops at current
position)
16
» icon will appear on remote controller
general
dehumidifi cation mode
» on remote controller once, the
» on remote
GB

Advertisement

Table of Contents
loading

Table of Contents