Toyotomi CTN/CTG-328W User Manual page 19

Wall mounted air conditioner inverter type
Hide thumbs Also See for CTN/CTG-328W:
Table of Contents

Advertisement

Available languages

Available languages

(4) Repeat the above step (2)~(3) operation, until 8 hours temperature setting
fi nished, sleep,curve setting fi nished, at this time, the remote controller
will resume the original timer display; temperature display will resume to
original setting temperature.
Sleep 3 the sleep curve setting under Sleep mode by DIY could be inquired:
The user could accord to sleep curve setting method to inquire the presetting
sleep curve, enter into user individuation sleep setting status, but do not change
the temperature, press «HEALTH» button directly for confi rmation. Note: In
the above presetting or enquiry procedure, if continuously within 10s, there
is no button pressed, the sleep curve setting within 10s, there is no button
pressed, the sleep curve setting status will be automatically quit and resume
to display the original displaying. In the presetting or enquiry procedure, press
«ON/OFF» button, «MODE» button, «TIMER» button or «SLEEP» button, the
sleep curve setting or enquiry status will quit similarly.
WiFi
button
Press «WiFi» button to turn on WiFi function, «WiFi» icon will be displayed on
the remote controller.
Hold «WiFi» button for 5s to turn off WiFi function and «WiFi» icon will
disappear.
Under off status, press «MODE» and «WiFi» buttons simultaneously for 1s,
WiFi module will restore factory settings.
Function introduction for combination buttons
Energy-Saving Function
Under cooling mode, press «MODE.» and «TIMER» buttons simultaneously
to start up or turn off energy-saving function. When energy-saving function
is started up, «SE» will be shown on remote controller, and air conditioner
will adjust the set temperature automatically according to ex-factory setting to
reach to the best energy-saving effect.
Press «MODE» and «TIMER» buttons simultaneously again to exit energy-
saving function.
NOTE
Under energy-saving function, fan speed is defaulted at auto speed and it
can't be adjusted.
Under energy-saving function, set temperature can't be adjusted.
Sleep function and energy-saving function can't operate at the same time.
19
GB

Advertisement

Table of Contents
loading

Table of Contents