SMART MX V2 Pro Series Installation And Maintenance Manual page 4

Important information
The accessory slot's maximum available power is 60 W.
l
The slot is not a limited power source. To reduce the risk
of fire, make sure that accessories connecting to the slot
satisfy the fire enclosure requirements of IEC 60950-1 or
IEC 62368-1.
You must connect the USB cable that came with the
l
display to a computer that has a USB compliant interface
and that bears the USB logo. In addition, the USB source
computer must be compliant with IEC 60950-1 and/or
IEC 62368-1. The source computer must be CE marked
and carry safety certification marks for Canada and USA.
This is for operating safety and to avoid damage to the
display.
IMPORTANT
The following are the normal operating power
l
requirements for the display, including speakers:
Model
SBID-MX255-V2
SBID-MX265-V2
SBID-MX275-V2
SBID-MX286-V2
For additional requirements and other information, refer
l
to the display's specifications (see More information on
page 16).
ENERGY STAR®
ENERGY STAR is the government-backed symbol
for energy efficiency, providing simple, credible,
and unbiased information that consumers and
businesses rely on to make well-informed
decisions. ENERGY STAR-certified products are
the simple choice for energy efficiency, making it
easy for consumers and businesses to make purchases that save
them money and protect the environment. The U.S. EPA ensures
that each product that earns the label is independently certified to
deliver the quality, performance, and savings that users have
come to expect.
As shipped, your display delivers ENERGY STAR performance
and savings. However, changing some settings may increase
energy consumption beyond the limits required for ENERGY
STAR certification. For example, increased brightness and
contrast will increase power consumption.
smarttech.com/kb/171555
Power requirements
100V to 240V AC, 50 Hz to 60
Hz, 98 W max
100V to 240V AC, 50 Hz to 60
Hz, 103 W max
100V to 240V AC, 50 Hz to 60
Hz, 114 W max
100V to 240V AC, 50 Hz to 60
Hz, 167 W max
Please consider the environment when you choose non-ENERGY
STAR settings.
Federal Communication Commission
interference statement
FCC
Suppliers Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Unique Identifier: IDX55-2, IDX65-2, IDX75-2, IDX86-2
Responsible Party – U.S. Contact Information
SMART Technologies Inc.
2401 4th Ave., 3rd Floor
Seattle, WA 98121
compliance@smarttech.com
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including
interference that may cause undesired operation.
NOTE
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
CAUTION
Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority
to operate this equipment.
Restriction
Operations in the 5.15-5.25GHz band are restricted to indoor
usage only.
IEEE 802.11b or 802.11g operation of this product in the USA is
firmware limited to channels 1 through 13.
CAUTION
i. the device for operation in the band 5150-5250 MHz is
only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems;
4