Input Commands - SMART MX V2 Pro Series Installation And Maintenance Manual

Appendix B
Managing the display using RS-232
Power state Description
READY The screen is off, but the display is ready to turn on when one of the following
occurs:
STANDBY The screen is off, and the display is in a low power state. The display enters READY
or ON state when one of the following occurs:
POWERSAVE The screen is off, and the display is a very low power state. The display enters
READY or ON state when one of the following occurs:
UPDATEON The display is updating firmware. Do not turn off the display.
UPDATEREADY The display is updating firmware while the screen is off. Do not turn off the display.
With the exception of get powerstate and set powerstate, commands are available only when the
display is in READY or ON power state.

Input commands

Get command
get input
smarttech.com/kb/171555
A user presses the Power button
l
control.
You send the set powerstate=on command.
l
A user presses the Power button
l
control.
You send the set powerstate=standby command.
l
A user presses the Power button
l
control.
You send the set powerstate=powersave command.
l
Set command
set input[Value]
Where [Value] is one of the following:
=hdmi1
l
=hdmi2
l
=hdmi3
l
=vga1
l
=ops1
l
=android
l
on the convenience panel or the remote
on the front control panel or the remote
on the front control panel or the remote
Response
input=[Value]
Where [Value] is one of the following:
hdmi1
l
hdmi2
l
hdmi3
l
vga1
l
ops1
l
android
l
75