Table of Contents
Advertisement
As regards the introduction of the liquid rinse aid product, use the passage "C" ,
placed near the water inlet group.
This coupling will allow an appropriate introduction of the liquid rinse aid product.
In order to do this use a fitting with nonreturn valve.
To connect the dispensers there are four light blue terminals, marked with special
labels, which are under tension when the pump is working. To avoid damages to the
electrical components it is compulsory to use these terminals and avoid movable
connections in other points of the plant.
Terminal voltage corresponds to line voltage.
DISPOSAL
At the end of its life, the machine shall be disposed according to the local laws in force by
specialized and acknowledged companies in this field. Its components shall be
distinguished as follows:
-
metal components: body, plans, frames, filters;
-
electric components: motors, remote control switch, microswitches, wiring;
-
plastic components: baskets, connections;
-
rubber components: hoses, sleeves.
26
Advertisement
Table of Contents
