Introduction And Safety Norms - lamber LINEAR 30 Instruction Manual

INTRODUCTION
AND SAFETY NORMS
INTRODUCTION
This equipment is destined only to the use it has been conceived for: tableware washing
such as dishes, glasses, cups, cutlery, trays, etc. Using it to wash machine components or
objects whose dimensions are superior to the machine working passage is improper and
therefore dangerous.
- Equipment in compliance with EEC89/336 directive concerning the suppression of radio
interferences and electromagnetic incompatibility.
- In conformity with the EEC directives and the fulfilment laws, our dishwashers are built
according to the regulations in force in Italy and abroad.
- The noise of the machine running empty, measured at the working positions (fig. 1) and at 1.6m
from the floor, is the following:
Leq A Level equivalent
of sound pressure dB(A)
The level of peak sound pressure Lpc is not declared as it is much inferior to 130dB(C):
PRELIMINARY OBSERVATION
Carefully read the instructions reported in the present user manual, as it gives important
indications about safety of installation, operation and maintenance:
- carefully keep the present manual for further consultations;
- the illustrations and drawings showing the machine are intended for general reference only
and are not necessarily accurate in every particular;
- the dimensions and characteristics of the machine, given in this Manual, are not to be considered
binding and may be changed without prior notice;
- having removed the packing material, check that all the equipment is present. If there is any
doubt, do not use it and contact qualified personnel. The packing elements (plastic bags,
nails, etc.) should be kept away from children, because they are dangerous.
This equipment is destined only to the use it has been conceived for: tableware washing
such as dishes, glasses, cups, cutlery, trays, etc. Using it to wash machine components or
objects whose dimensions are superior to the machine working passage is improper and
therefore dangerous.
position 1
70
position 2
68
6
position 3
70