lamber LINEAR 30 Instruction Manual

Belt-towing dishwashers

Advertisement

Quick Links

DICHIARAZIONE DI CONFORMITA' - DECLARATION OF CONFORMITY
DECLARATION DE CONFORMITE' - KONFORMITÄTS ERKLÄRUNG
Noi - The following - Nous soussignés - Die Unterzeichnete Fa:
dichiariamo sotto la nostra esclusiva responsabilità che il prodotto
hereby declares under full responsability that the following product
attestons sous notre entière responsabilité que le produit suivant
erklärt unter eigener Verantwortung, dass folgende Produkte
LAVASTOVIGLIE A NASTRO - LAVE-VAISSELLE A' CONVOYEUR –
BELT TOWING DISHWASHERS – GESCHIRRWASCHMASCHINEN MIT FOERDERBAND
mod.
al quale questa dichiarazione si riferisce è conforme alle seguenti norme:
for which this declaration refers to the conformity of the following standards:
auquel se référe cette dèclaration, est conforme aux normes suivantes:
auf welche sich diese Erklärung bezieht, folgendem Standard entsprechen:
-
EN 60335-1 (1994) + A2,A5,A6,A51,A52,A53,A54,A55
Sicurezza degli apparecchi elettrici d'uso domestico e similare. Norme generali
Safety of household and similar electrical appliances-General requirements.
-
EN 60335-2-58 (1997)
Sicurezza degli apparecchi elettrici d'uso domestico e similare. Parte 2':Norme particolare lavastoviglie uso
collettivo.
Safety of household and similar electrical appliances-Part 2':Particular requirements for commercial electric
dishwashing machines.
-
EN 292-2 (1992) Part 1' - PART 2'
Sicurezza del macchinario-Concetti fondamentali-Principi generali progettazione-Specifiche e principi tecnici.
Safety of machinery-Basic concepts-General principles for design-Tecnical principles an specification
-
EN 61770- (2000)
Apparecchi elettrici connessi alla rete idrica. Disposizioni per evitare il ritorno d'acqua per effetto sifone e il
guasto dei complessi di raccordo
Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
in base a quanto previsto dalle Direttive:
on the basis of what is foreseen by the Directives:
selon ce qui est prevu par les Directives:
aufgrund der vorgesehenen Richtilinien:
Decliniamo ogni responsabilità per sinistri a persone o a cose derivanti da manomissioni da parte di terzi o da carenze di manutenzione o riparazione.
Nous déclinons toute responsabilité pour sinistres à personnes ou à objets qui derivent de l'intervention de la part de tiers non specialistes ou de
carences de manutention ou reparation.
We decline any responsability for injuries or damage derived from machine misuse, abuse by others or improper machine maintenance or repairs.
Wir Iehnen jegliche Verantwortung für Schäden an Personen oder Dingen ab, die auf fehlerhaftes Eingreifen Dritter oder auf mängelhafte Wartung oder
Reparation zurückzuführen.
li
01/01/02
(data/date/Datum)
LINEAR 30 - 40 PRC - 60 PRC - 80 PRC
89/392/CEE, 91/368/CEE, 93/44CEE, 93/68CEE (MACHINERY)
(name signature or equivalent of authorized representative)

Advertisement

Table of Contents
loading

Summary of Contents for lamber LINEAR 30

  • Page 1 Verantwortung, dass folgende Produkte LAVASTOVIGLIE A NASTRO - LAVE-VAISSELLE A' CONVOYEUR – BELT TOWING DISHWASHERS – GESCHIRRWASCHMASCHINEN MIT FOERDERBAND LINEAR 30 - 40 PRC - 60 PRC - 80 PRC mod. al quale questa dichiarazione si riferisce è conforme alle seguenti norme: for which this declaration refers to the conformity of the following standards: auquel se référe cette dèclaration, est conforme aux normes suivantes:...
  • Page 2 TECHNICAL DATA AND DESCRIPTION The table reported at page 1 shows the basic models of belt-towing dishwashers and identifies the single washing areas to which additional modules can be added to improve their performance. ACCESSORIES DRYING TUNNEL STEAM CONDENSER HEAT RECOVER SYSTEM AUTOTIMER WATER PROTECTION WITH COLLAR BOOSTER PUMP...
  • Page 3: Table Of Contents

    Contents General norms page Introduction and safety norms page Unpacking and delivery checks page 1 – INSTRUCTIONS FOR THE USER page First section - For the user – Operation before washing page Control panel key page Switch-on and use of the dishwashing machine mod. LINEAR page Washing of dishes –...
  • Page 5: General Norms

    INSTRUCTIONS MANUAL BELT-TOWING DISHWASHERS LINEAR The Belt-towing dishwashing machines of the LINEAR series are designed to wash any kinds of dishes . The modular system and the various optionals available allow the make-up of dishwashing machines with the most appropriate features in order to meet your production,space saving and energy-saving requirements.
  • Page 6: Introduction And Safety Norms

    INTRODUCTION AND SAFETY NORMS INTRODUCTION This equipment is destined only to the use it has been conceived for: tableware washing such as dishes, glasses, cups, cutlery, trays, etc. Using it to wash machine components or objects whose dimensions are superior to the machine working passage is improper and therefore dangerous.
  • Page 7 GENERAL SAFETY REGULATIONS THIS SAFETY CODE HAS BEEN COMPILED IN YOUR INTEREST. Strict adherence to these rules will reduce the risks of injury both to yourself and to others; Personnel working with this machine must adhere strictly to all statutory safety regulations as well as the specific rules listed below.
  • Page 8: Unpacking And Delivery Checks

    UNPACKING AND DELIVERY CHECKS When the case with the machine has been received, unpack it as follows: - Remove the upper cover and the wooden case side walls, take care not to damage the machine, - Remove possible accessories boxes, - Remove the protecting cellophane, - Make sure that the machine has not been damaged during transport, - Make sure that all covers and panels have been correctly fixed and that no loosen part...
  • Page 9: Instructions For The User

    INSTRUCTIONS FOR THE USER...
  • Page 10: First Section - For The User - Operation Before Washing

    LINEAR First Section - FOR THE USER OPERATION BEFORE WORKING EFORE STARTING THE WORKING OPERATION BE SURE THAT the wall-mounted on/off switch is switched on; the water and steam* cocks are open; water and steam (*) are present in the system; filters the overflow are in their housings;...
  • Page 11 DESCALING When hard water is used you can find, inside the machine and also on objects, calcareous sediments which must be removed both for hygienic and operating reasons by a descaling operation. Operating process and frequency of this intervention are suggested by your cleansing agent supplier who has suitable products, generally containing phosphoric acid.
  • Page 12: Control Panel Key

    CONTROL PANEL LINEAR QC-LIN40...
  • Page 13 SYMBOLS USED FOR THE CONTROLS MAIN ON/OFF START PUSHBUTTON SWITCH SPEED STOP SELECTOR PUSHBUTTON MACHINE PRE-RINSING OVERLOAD CUTOUT TANK FILLING INDICATOR CONTINUOUS PRE-WASHING WASHING TIMED WASHING, FOR MACHINES DRYING ON WITH AUTOTIMER MACHINE-ON FLOWMETER INDICATOR RINSING 1ST SPEED THERMOMETER 2ND SPEED PRE-WASH THERMOMETER MACHINE READY...
  • Page 14: Switch-On And Use Of The Dishwashing Machine Mod. Linear

    SWITCH-ON AND USE OF THE DISHWASHING MACHINE for the symbols used (See page 12 and 13 "A1" "I" Turn switch to position "R" subsequently switch to position Washing and belt-conveying are started up "A". at this point and the machine is ready for Line lamp "D"...
  • Page 15: Washing Of Dishes - Operations By Washing

    WASHING OF DISHES DURING WASHING OPERATIONS 1) Check that the water temperatures are Fisrt of all, remove any food residues in accordance with the specified values : and any oily masses . pre-washing 35÷45°C, washing 55÷60°C; rinsing 80÷85°C Knives , forks and spoons should be previously softened;...
  • Page 16 machine before removing the obstacle causing the trouble. Do not start it again until you are sure that the obstacle has been removed. Desactivate the equipment in case of fault or malfunction. For repairs, only address to a technical assistance center authorised by the manufacturer and impose the use of original spare parts.
  • Page 17: Dishes Positioning

    DISHES POSITIONING POSITION THE KITCHENWARE ON THE CONVEYOR BELT ACCORDING TO THE WORKING DIRECTION OF THE MACHINE (see page 1 and 2 in the instruction manual). CUTLERY, CUPS AND GLASSES HAVE TO BE PLACED IN THEIR PLASTIC BASKETS; DISHES HAVE TO BE PLACED WITH THE CONVEX SIDE UPWARDS; THE TRAYS HAVE TO BE SECURED WITH THE ORANGE HOOKS IN THE MIDDLE OF THE BELT.
  • Page 18: After Washing Operations

    Lift the overflows (draw 4 – n.3) to AFTER WASHING OPERATIONS empty the tanks. Make sure the overflow has also PRECAUTION CLEANING been removed (draw 5 no.6) from INSTRUCTIONS the pre-rinse tank after removing the upper drawer filter (draw 5 no.5) high temperatures can be reached inside the machine (90°C).
  • Page 19: Helpful Suggestions - Achievements

    Machine prolonged stop In case the machine is not used for some weeks it is advisable to carry out an accurate cleaning of all components inside to avoid the formation of unpleasant smells. fig.5 – Steam condenser In case of a very long standstill, it is advisable to oil the stainless steel surfaces 10 - Check that the washing nozzles are...
  • Page 20: Safety Devices

    DOOR MICROSWITCHES ACHIEVEMENTS Each inspection door is provided with two Any deficiency in the washing process is safety microswitches forming apparent when dirty residuals are visible. redundant chains (safety level 2). Any halos might be caused by an If one of the doors accidentally opens, the insufficuent rinsing: in this case, check pumps, the conveyor belt gearmotor and that the rinsing jets are clean and there is...
  • Page 21 In this case, immediately rinse them with MOTOR PROTECTION DEVICES plenty of water. Each motor is protected against short- Risk of crushing the upper limbs circuits and current overload by automatic magneto-thermal relays. As already said the conveyor plant is Lamp "M"...
  • Page 22: Useful Hints For Stainless Steel Maintenance

    USEFUL HINTS OF STAINLESS STEEL MAINTENANCE Stainless steel is so called because it is not affected by oxidation,this is due to a thin molecular layer of oxide on the surface which protects againts further oxidation. There are, howevwr, substances which can modify or destroy this layer,giving rise to corrosion:besides preventing the protective film of oxide from reforming,these substances corrode the stainless steel itself and can cause irreparable damage.
  • Page 23: Instructions For The Installer

    INSTRUCTIONS FOR THE INSTALLER The following instructions are addressed to a qualified personnel, the only one authorised to carry-out checks and repair, if any. The Manufacturer declines any responsibility in the case of interventions made by a non qualified personnel.
  • Page 24 LINEAR Second Section - FOR THE INSTALLER The following instructions are addressed to qualified personnel who is the only one authorized to carry out the inspections and the necessary repairs. The machine should be installed into a “Normal” environment, that is to say indoors, free of dust, explosion-proof and adequately lit and well aired.
  • Page 25: Second Section - For The Installer - Detergents - Disposal

    As regards the introduction of the liquid rinse aid product, use the passage “C” , placed near the water inlet group. This coupling will allow an appropriate introduction of the liquid rinse aid product. In order to do this use a fitting with nonreturn valve. To connect the dispensers there are four light blue terminals, marked with special labels, which are under tension when the pump is working.
  • Page 26 all poles according to EN 60204 (VDE POSITIONING 113). During the installation provide a good The mains must be wired to be able to leveling of the machine in order to allow it handle current drawn work properly (doors, basket machine.The system must...
  • Page 27: Installation

    manufacturer declines excellent rinsing, it shall be calibrated according to the data reported on the plate responsibility for any damages caused located in connection with the reducer lack effective ground itself. installation. Emergency pushbuttons: Cold water supply The machine is also equipped with This connection is required only for emergency pushbuttons located by the machine with pre-wash and any other...
  • Page 28: Water Connections - Water Draining

    STEAM EXHAUST * STEAM FEEDING * The condensed steam exhaust shall have As far as steam feeding is concerned, an appropriate slope toward the recovery connect to the machine fittings indicated installation or a blow-by pump, in order to in the installation drawings. In order to guarantee an autonomous scavenging of make the equipment independent from the condensed steam.
  • Page 29: Steam Feeding - Steam Exhaust - Vapours Suction

    TESTING PRE-RINSING Before starting the machine: The pre-rinsing thermostat (CT7) will be set according to the following temperature: During testing operations, prior Pre-rinsing water: 60°C. switching the dishwashing machine on, check that thermostat of the rinsing boiler (0°-90° C) TAMPER WITH is reset and the direction of rotation of the THERMOSTAT CALIBRATION...
  • Page 30: Testing - Work Temperatures - Torque Limiter

    Attention: before setting the clutch check the belt tension by ruling the screws of the turnbuckle in entrance.The right position must allow to lift the belt 10 centimeters over its support in the central part of it. This adjustment should be repeated 6 months after the first installation.

This manual is also suitable for:

Linear 40 prcLinear 60 prcLinear 80 prc

Table of Contents