First Section - For The User - Operation Before Washing - lamber LINEAR 30 Instruction Manual

First Section - FOR THE USER
B
EFORE STARTING THE WORKING OPERATION BE SURE THAT
- the wall-mounted on/off switch is switched on;
- the water and steam* cocks are open;
- water and steam (*) are present in the system;
- the filters
- curtains are correctly positioned;
- the inspection doors are closed;
- the dimensions of the dishes to be washed do not exceed the washing working
dimensions;
- Check that the detergent and rinse aid containers are not empty.
(*) for steam machines only
DETERGENTS
In case the machine is not provided with an automatic dispenser, pour the detergent
directly into the washing tank and uniformly distribute it on the filters in the doses
indicated by the supplier.
N.B.: If you use chlorinated sanitized detergents, it is always advisable to employ an
automatic dispenser
concentration, because brownish spots can appear on the surfaces due to chlorine
reactions when pouring the detergent directly into the tank.
In any case the product shall be introduced near the pump suction pipe into the tank and
at least 15 cm far from the bottom in order to avoid corrosion.
Choice of the suitable cleansing agent is an essential condition if you want to obtain
extremely good washing results as concerns hygienic results. It is then important to
consider some points. First of all only highly alkaline and chlorine-active antifoam
products, especially made for industrial dish-washing machines, must be used and they
must be produced by well known reliable Firms. We provide a short list just as an
indication: Ecolab-Soilax; Henkel; Lever; Diversey; Relativ.
Mean concentration of the powder cleansing agents must be 1,5-2,5 g/lt.
Mean concentration of liquid cleansing agents must be 2-4 g/lt.
In order to avoid scales and corrosions, put cleansing agent above water level on the
nearest area of the sucking pump filter, in this way it will immediately dilute and will not
deposit on the tank bottom.
OPERATION BEFORE WORKING
and the overflow are in their
with feeler
:
housings;
for the measurement
10
LINEAR
of the detergent