Reference Design Of Main Antenna Interface - Quectel BG772A-GL Hardware Design

LTE-FDD B13
LTE-FDD B17
1)
LTE-FDD B18
LTE-FDD B19
LTE-FDD B20
LTE-FDD B25
LTE-FDD B26
2)
LTE-FDD B27
2)
LTE-FDD B28
LTE-FDD B66
NOTES
1. LTE-FDD B17 is supported by Cat NB2 only.
1)
2. LTE-FDD B26 and B27 are supported by Cat M1 only.
2)

5.1.3. Reference Design of Main Antenna Interface

A reference design of main antenna interface is shown as below. It is recommended to reserve a π-type
matching circuit for better RF performance, and the π-type matching components (R1/C1/C2) should be
placed as close to the antenna as possible. The capacitors are not mounted by default.
BG772A-GL_Hardware_Design
777–787
704–716
815–830
830–845
832–862
1850–1915
814–849
807–824
703–748
1710–1780
Figure 22: Reference Design of Main Antenna Interface
LPWA Module Series
BG772A-GL Hardware Design
746–756
734–746
860–875
875–890
791–821
1930–1995
859–894
852–869
758–803
2110–2180
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
53 / 75