Table of Contents
Advertisement
Operation
205.50
213.50
593.85
1414.2
22
EVO1S | SPO1S Operating Instructions
6.5.2 Weighing with Two Decimal Places (Not for Verified Models)
A menu setting is required for weighing with two decimal places (see
Chapter "6 .7 .2 .4 Activating the Toggle Key (Not for Verified Models)," page 26) .
Place the empty paint can on the weighing pan .
t
0.0
Briefly press the 0 key to zero .
t
The display shows "0 .0 g ."
y
Press the toggle key Z .
0.00
t
The display shows "0 .00 g ."
y
Add the first component "205 .50 g ."
t
Read off the weight when the stability symbol (in this example) "g" is displayed .
t
Add the other components until the desired weight (formula) is reached .
t
Remove the filled paint can from the weighing pan .
t
When the scale is tared and the second decimal place with a resolution of 0 .05 g is
activated via the toggle key Z, weighing up to 999 .95 g with two decimal places
can be performed .
Values over 999 .95 g can only be weighed using one decimal place .
Danger of Scale Damage!
Never close a paint can using a hammer while it is still on the weighing pan .
When closing the paint can, place it on a firm, stable surface .
t
6.6 Applications
Note for Scales for Use in Legal Metrology:
All application programs can be selected on scales verified for use in legal metrology .
Calculated values can be marked using the following characters:
− Percent = %
− Computed values = o, l symbol
Advertisement
Table of Contents
