106 Configure an E1/T1 card
Figure 18
Ping results of a successful E1/T1 connection to ELAN subnet
Figure 19
Ping results of no E1/T1 connection to ELAN subnet
Remote access to the E1/T1 card
Remote access to the E1/T1 card is supported through:
•
•
You can connect a modem to the E1/T1 card through a serial port 9-pin
connector. The E1/T1 card ignores all RS-232 control signals, so a
modem eliminator (null modem) is required as shown in
connection" (page
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
Telnet
FTP
107).
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
Figure 20 "Modem