Configure Basic System Parameters - Nortel Media Gateway 1000E PRI Installation And Comissioning Manual

Configure basic system parameters
The administrator completes the basic parameters for the E1/T1 card. See
Procedure 44 "Configuring basic parameters for an E1/T1 card through
the Web" (page
Procedure 44
Configuring basic parameters for an E1/T1 card through the Web
Step
1
Figure 28
System Settings - Basic Settings window
2
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
Access and configure an E1/T1 card through the Web 115
115).
Action
On the Home - System Overview screen, select System Settings
> Basic Setting.
The window shown in
window" (page 115)
The IP address was previously defined through a CLI command as
shown in "Configure LAN parameters" (page
In the MGC IP address field, type the IP address of the Media
Gateway Controller.
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007
Figure 28 "System Settings - Basic Settings
appears.
103).