Printing Card Identifiers For E1/T1 Cards - Nortel Media Gateway 1000E PRI Installation And Comissioning Manual

132 Maintenance and diagnostics
PRI2, 264, NTDW70AAE5 01 NNTML2????????????
...
DPNSS1-DTCS, 266, NTDW70AAE5 01 NNTML2????????????
where:
field 1 = card type (PRI or PRI2 or DPNSS)
field 2 = loop number of the PRI Gateway for which the E1/T1 card is being
used
field 3 = PEC code (NTDW70AAE5)
field 4 = release of the card
field 5 = factory code, source code, serial number, and manufacturing data
of the card
Only E1/T1 cards and spans that are configured in the software are printed.
Printing card identifiers for E1/T1 cards
To print the card ID for the E1/T1 cards, enter this command:
IDC l s <1-8>
The IDC command maps card slots 1 to 8 to the MGP span positions 1 to
8 in the E1/T1 card.
The card inventory prints out as shown in this example:
NTDW70AAE5 NN NNTML2????????????
where:
field 2 = release number (for example, 01)
field 3 = serial number
Media Gateway 1000E PRI Gateway Installation and Commissioning
Copyright © 2007, Nortel Networks
.
Nortel Communication Server 1000
NN43041-311 01.01 Standard
Release 5.0 30 May 2007