Installing The Batteries; Using The Remote Control; First Time Installation - Strong SRT40FC4003 User Manual

36. 7
37. 8
38. 6
39. 5
40. COLOUR BUTTONS

2.6 Installing the batteries

Place 2x AAA batteries in the battery compartment of the remote control. Make sure to match the
polarity markings inside the compartment.
NOTE:
1. Slide the cover horizontally.
2. Put 2x AAA batteries in the compartment and make sure the polarity is correct.
3. Slide horizontally to close the cover.
Precautions for using the battery
Improper using of the battery will cause leakage. Carefully follow these instructions.
1. Please note the batteries' polarity to avoid short circuit.
2. When the battery's voltage is insufficient which affect the use range, you should replace it with
a new battery. Remove the batteries from the remote control unit if you do not intend to use it
for a long time.
3. Do not use different types of batteries (for example Manganese and Alkaline batteries) together.
4. Do not put the battery into fire, and charge or decompose the battery.
5. Please dispose batteries abide by relevant environmental protection regulation.

2.7 Using the remote control

Use the remote control by pointing it towards the remote sensor. Items between the remote
„
control and the remote sensor could block normal operation.
Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote
„
control, also do not put the remote control in a high humidity place.
Do not place the remote control under direct sunlight which will cause deformation of the unit
„
by heat.
When the remote sensor is under direct sunlight or strong lighting, the remote control will not
„
work. If so, please change the lighting or TV's position, or operate the remote control closer to
the remote sensor.

3.0 FIRST TIME INSTALLATION

After all connections have been properly made, switch on your TV. The language selection will appear on
screen. Use pq t u to select the OSD Language of your preference. Confirm with OK on your remote
control.
The next screen appears with the Mode Selection to select Home Mode or Shop Mode. Press OK and t u
to confirm.
Then the next screen appears with the tuner selection. Choose the one you like to use.
Press to play the previous file.
Press to play the next file.
Press to fast forward.
Press to fast reverse.
Press to execute the prompt function in TV or DTV menu mode.
Pictures are only for reference. Actual items may differ.
Fig. 5
7