Table of Contents
Advertisement
User's Guide
6. Tap Proceed.
Note:
❏ If an error message is displayed, check if the email server settings are correct.
❏ When you cannot send an email even if the connection check succeeds, check the authentication method for the
email server you are using.
Related Information
"Email Server Setting Items" on page 220
&
Email Server Setting Items
Items
Authenticated Account
Authenticated Password
Sender's Email Address
SMTP Server Address
SMTP Server Port Number
POP3 Server Address
POP3 Server Port Number
Secure Connection
Checking an Email Server Connection
1. Tap Settings on the home screen.
2. Tap General Settings > Network Settings > Advanced.
Appendix
Explanations
If you select SMTP-AUTH or POP Before Smtp as the Email
Server Authentication Method, enter the user name (email
address) registered to the email server within 255 characters
or less.
If you select SMTP-AUTH or POP Before Smtp as the Email
Server Authentication Method, enter the password of the
authenticated account within 20 characters or less.
Specify the email address that the printer uses to send
emails. You can specify the existing email address. To make it
clear that the email is being sent from the printer, you can
acquire an address specifically for the printer and enter it
here.
Enter the server address of the server that sends the email
(SMTP server).
Enter the port number of the server that sends the email
(SMTP server).
If you select POP Before Smtp as the Email Server Authen-
tication Method, enter the server address of the server that
receives the email (POP3 server).
If you select POP Before Smtp as the Email Server Authen-
tication Method, enter the port number of the email server
that receives the email (POP3 server).
If you select SMTP-AUTH or Off as the Email Server Au-
thentication Method, select the method of the secure con-
nection.
220
Advertisement
Table of Contents
