Epson WorkForce Pro WF-3730 Series User Manual page 88

User's Guide
Original Size:
Select the size of your original. When copying non-standard size originals, select the size closest to your
original.
Multi-Page:
❏ Single Page
Copies a single-sided original onto a single sheet.
❏ 2-up
Copies two single-sided originals onto a single sheet in 2-up layout. Select the layout order and the
orientation of your original.
❏ 4-up
Copies four single-sided originals onto a single sheet in 4-up layout. Select the layout order and the
orientation of your original.
Original Type:
Select the type of your original. Copies in optimal quality to match the type of original.
Finishing:
Select how to eject the paper for multiple copies of multiple originals.
❏ Group (Same Pages)
Copies the originals by page as a group.
❏ Collate (Page Order)
Copies the originals collated in order and sorted into sets.
Orientation (Original):
Select the orientation of your original.
Remove Shadow:
Removes shadows that appear around copies when copying thick paper or that appear in the center of
copies when copying a booklet.
Remove Punch Holes:
Removes the binding holes when copying.
ID Card Copy:
Scans both sides of an ID card and copies onto one side of A4 size paper.
Borderless Copy:
Copies without margins around the edges. The image is enlarged a little to remove margins from the
edges of the paper. Select how much to enlarge in the Expansion setting.
Clear All Settings:
Resets the copy settings to their defaults.
Copying
88