Table of Contents
Advertisement
2.1
Installation
iDAQ-934/iDAQ-938
After the device drivers are installed, the iDAQ-934/iDAQ-938 chassis can be
installed in the computer.
1.
Touch any metal surface of the computer to discharge any static electricity that
may be in your body.
2.
Insert the USB cable into the designated USB port.
After the chassis and iDAQ modules are installed, the device can be configured using
the Advantech Navigator Program automatically installed during driver setup. Note
that the iDAQ modules would only be recognized when the module is inserted in the
iDAQ chassis.
iDAQ-964
The iDAQ-964 should be used along with AMAX-5000 system. Here we take AMAX-
5580 as an example. The assembly procedure is as follows:
1.
Insert the PCI express BUS into the AMAX system.
2.
Tighten the three screws around the connection on the AMAX-5580.
iDAQ-900 User Manual
Figure 2.1 Installation Guide of iDAQ-964
8
Advertisement
Table of Contents
