Table of Contents
Advertisement
10. Press the UP button to raise the fork of the column to touch the tire.
Repeat for other three columns.
11. If necessary, press BIAS to choose customized zero-point.
12. Set the mode to ALL / VEHICLE by pressing button [13].
5.2 RAISING AND LOWERING ALL LIFTING COLUMNS
Press UP or DOWN button to raise or lower the vehicle to desired height.
When the DOWN button is pressed, the columns will be raised up a little
distance, to unlock the mechanical lock, and then lower down.
(See section 3, paragraph 3.3: Description of the portable column lift
system.)
Once desired height has been reached, it is recommended but not required
that the lift be lowered into the mechanical locks.
Before begin to work under the vehicle, it is recommended to support the
vehicle with the safety stand before turning power switch to middle position
(OFF)
5.3 Explanation of message on LCD:
1. Slowing
Mode: II..II
bias: Z___
L2 11
10
10
10
Slowing...
Column 2# or both 1# and 2#
difference is greater than 3/4" (20mm), the column(s) will be slowed down
automatically.
2. Suspending
Mode: II..II
L2 28
30
L1 28
30
Suspending...
Both column 1# and 2# are quick in rising or lowering. The height difference is
0
0
are quick in rising or lowering, The height
bias: Z___
0
0
21
Nov. 2021
MSC-13K
Mode: II..II
L2 54
L1 54
Slowing...
Or
Mode: II..II
L2 48
L1 46
Suspending...
Or
bias: Z___
55
0
55
0
bias: Z___
47
0
46
0
Advertisement
Table of Contents
