IDEAL MSC-13K-B Manual page 11

4.2 CONTROL PANEL DETAILS
1. EMERGENCY BUTTON
Button to stop movements (lifting or lowering) immediately.
2. POWER SWITCH
Controls the power of the control panel or charging of the batteries.
3. "⇑ (UP)" button
Controls the lifting of the columns.
4. "⇓ (DOWN)" button
Controls the lowering of the columns.
5. "⇓ (PARK)" button
Controls the locking of the columns.
6. "POWER" light.
This light will go on when the control panel is power on.
7. 8. 9. 10. CURSOR buttons.
These buttons move cursor on the screen to edit items.
11. 12. 13. MODE buttons.
These buttons serve to select between the functions: "WHEEL", "AXLE" &
"ALL"
14. "BIAS" button
To set the zero point of height readings in initialization.
15. "START" button
This button starts the running of the software.
16. "SHIFT" button.
This button is for the running of the program.
17. "ENTER" button
This button serves confirming of instruction or entering sub menu.
18. "ESC" button
Serves to enter or exit from menu; or from sub menu to upper lever menu.
19. LCD SCREEN
Display the height readings of columns & information
20. "WARNING" light
This light will go on when the EMERGENCY button is pressed.
21. CABLE PORT
This port is used for communication cable connection.
22. BATTERY INDICATOR
This indicator shows the output voltage of the batteries.
23. HAND / REMOTE CONTROLLER PORT
The port is for hand/remote controller connection
24 BATTERY SWITCH
.
To connect or disconnect the DC power supply.
Also use as column emergency switch.
11
Nov. 2021
MSC-13K