Restoring Factory Settings In Tablet Setup; Updating The Bios; Determining The Bios Version - HP ZBook x2 Manual

Detachable workstation
Hide thumbs Also See for ZBook x2:
Table of Contents

Advertisement

Restoring factory settings in Tablet Setup

NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Tablet Setup to the values that were set at the factory, follow these steps:
1.
Start Tablet Setup. See
2.
Select Main, and then select Apply Factory Defaults and Exit.
NOTE:
and Exit.
3.
Follow the on-screen instructions.
4.
To save your changes and exit, select the Save icon in the lower-right corner of the screen, and then follow
the on-screen instructions.
– or –
Select Main, select Save Changes and Exit, and then press enter.
Your changes go into effect when the tablet restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory settings.

Updating the BIOS

Updated versions of the BIOS may be available on the HP website.
Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding installing and
troubleshooting the file.

Determining the BIOS version

To decide whether you need to update Tablet Setup (BIOS), first determine the BIOS version on your tablet.
BIOS version information (also known as ROM date and System BIOS) can be accessed by pressing
are already in Windows), by pressing Start > Run > msinfo32, or by using Tablet Setup.
1.
Start Tablet Setup. See
2.
Select Main, and then select System Information.
3.
To exit Tablet Setup without saving your changes, select the Exit icon in the lower-right corner of the
screen, and then follow the on-screen instructions.
– or –
Select Main, select Ignore Changes and Exit, and then press enter.
To check for later BIOS versions, see
136 Chapter 7 Tablet Setup (BIOS), TPM, and HP Sure Start
Starting Tablet Setup on page
On select products, the selections may display Restore Defaults instead of Apply Factory Defaults
Starting Tablet Setup on page
Downloading a BIOS update on page
135.
135.
137.
fn+esc
(if you

Advertisement

Table of Contents
loading

Table of Contents