3.2. Advanced Options
To change the detailed configuration, In the 'Layout' tab shown,
"Advanced..." shown on the bottom of the 'Layout' tab of the 'Preferences'
Reset Default Values: Reset to default.
Color Correction: You can correct gamma for colors. You need to use
CardPrinterConfig to adjust color densities.
-
Main [-100:100] : Correct gamma for all panels
-
Yellow [-100:100] : Correct gamma for yellow panel
-
Magenta [-100:100] : Correct gamma for magenta panel
-
Cyan [-100:100] : Correct gamma for cyan panel
-
Black [-100:100] : Correct gamma for black panel
-
Overlay [-100:100] : Correct gamma for overlay panel
Position Processing: Set criteria for resin black processing.
-
Color [-32:32]: to set the position of color panels
-
Mono [-32:32]: to set the position of resin or mono panel
-
Overlay [-32:32]: to set the position of overlay panel
Resin Black(K) Processing: Set criteria for resin black processing.
-
Text [0:100]: to set density criteria for extracting black objects
-
Dot [0:100]: to set density criteria for extracting black dots
-
Threshold [0:100]: to set density criteria on dithering
-
Dithering Degree [0:100]: to set sharpness on dithering
-
Resin Extraction: You can set the method to extract resin black when you use
design programs. (If you use the SMART IDesigner, you don't need to select this
option.) It will be set automatically.
27
Please click
.