4. Utilities
4.1. Card Printer Config
SMART-21 is produced with optimized setting. You need to adjust setting value if required or
spare parts are replaced using CardPrinterConfig in the "Utilities package".
(Available for download at www.idp-corp.com)
You can adjust following settings with CardPrinterConfig.
(1) Run CardPrinterConfig
Password input window is displayed when
you run this program. If you input the
correct password, the recorded setup value
will be shown and you can change values.
The password is saved to SMART-21
printer. So if you use another PC with same
printer, previous password is required to
run this program.
none. Please press OK if you have not set
password.)
When you are successful to log-in, you can
set values shown as left picture.
(Default password is
Figure 46
CardPrinterConfig Log-in
Figure 47
CardPrinterConfig start
33