Figure 57 Select Firmware; Figure 58 Update Firmware - idp SMART-21S User Manual

Color Sensor Calibration : To re-adjust
the measured value of the color sensor.
Message : It displays information of
updating.
(2)
Ready for Firmware Update

Select the printer to update the
firmware on the 'Device' list.

Select the device to update the
firmware Printer tab.
 Click "Browse" and select the new
firmware
(3)
Firmware Update
 Click "Update" button to upgrade
automatically, then the printer is
upgraded after rebooting.

In case there are some problems in the
automatic upgrade, you click "Manual
Update" and can see the pop-up widow
as below picture. It shows procedure of
manual upgrade. You can upgrade
manually according to this procedure.
(Caution: Please do not close upgrade
dialog box until it is completed successfully
and do not turn off the printer.)

Figure 57 Select Firmware

Figure 58 Update Firmware

47