Table of Contents
Advertisement
SmartSource Elite Series - Installation & Operations Guide
Remove the inkjet cartridge and wipe the inkjet nozzles briefly with a soft cloth moistened with water. Use
only water – use of any other cleanser or solvent may destroy the cartridge. When cleaning the nozzles,
fresh ink may appear after cleaning – this is normal.
Examine the electrical contacts on the underside of the inkjet cartridge and wipe clean if any dirt or debris
is seen.
Cleaning the endorser station (Professional Elite, Expert Elite and Ultraviolet Elite & all 55DPM
Models)
After extended use, the track walls around the inkjet endorser may accumulate ink and debris from the
documents, and this may lead to ink lines or smears on the face of the documents. If these are seen,
clean the track walls around the endorser, as shown.
Clean ink from
endorser wall
With the inkjet cartridge removed and the front cover opened, clean the track walls using a soft cloth
moistened with water.
The inkjet cartridge has a 'priming' function, in which it prints into an empty track to test that the cartridge
is working correctly. To catch 'priming' ink, a felt pad is built into the track wall opposite the endorser.
May 2019
8227 4907-005
Clean ink from wall
opposite endorser
Page 26 of 37
Advertisement
Table of Contents
