Table of Contents
Advertisement
SmartSource Elite Series - Installation & Operations Guide
Cleaning the image cameras
Be especially careful when cleaning around the image cameras. The image cameras have glass faces
which can be easily broken if a metal probe is used.
The glass faces of the image cameras may acquire a build-up of dirt and ink from the passing documents,
which affects image quality. If streaks, lines or a loss of image quality are seen, the image cameras
should be cleaned.
Open the image cover to expose the glass faces of the image cameras, as shown.
DO NOT VIEW THE LIGHT SOURCE DIRECTLY WITH OPTICAL
Front image
camera face
Clean the glass faces using a soft cloth moistened with water. For stubborn stains isopropyl alcohol may
be used. Cleansing wipes pre-soaked with suitable solvent are available from Digital Check,
www.digitalcheck.com, part number 751804907. Ensure that any cleanser or solvent has been
completely wiped off or dried before closing the image cover.
May 2019
Ultraviolet Elite only:
WARNING
INVISIBLE LED RADIATION
INSTRUMENTS.
CLASS 1M LED PRODUCT
Rear image
camera face
8227 4907-005
Page 23 of 37
Advertisement
Table of Contents
