Table of Contents
Advertisement
Installation & Operations Guide - SmartSource Micro Elite IJ
Section 3
Cleaning the unit
Rapid cleaning of the unit
Automatic Cleaning Mode:
purple)-insert cleaning card into feed hopper. Cleaning card automatically scrubs the track. LED color returns to its
prior state after cleaning process is complete, then scanner is ready to process.
To clean light build-up of dust and dirt out of the track, use a Check Scanner Cleaning Card, one of which came with the
machine. Follow the instructions on the packaging. Regular use of track cleaning cards will minimize the accumulation of
dust and dirt.
Detailed cleaning of the unit
Before performing any cleaning, turn off power to the unit and unplug the AC power cord.
For general cleaning of the outside covers of the machine, any mild water-based cleanser, used sparingly, is appropriate.
For cleaning sensors, image sensors and track walls, a mild solvent such as isopropyl alcohol, preferably diluted 50% with
water, may be used. Cleansing wipes pre-soaked with suitable solvent are available from the Digital Check Store,
www.digitalcheck.com, part number 75-1804-907.
Do not use aggressive solvents such as gasoline, petrol, kerosene, paraffin, acetone or MEK, and use no abrasive
cleansers at all.
Cleaning the track
Cleaning the track generally involves two issues, which are
General dust and dirt in the track & ink around the rear of the track
Foreign objects such as staples, paper clips and rubber bands.
How often the track should be cleaned depends on the quantity and quality of documents being processed and the
amount of dust, dirt, ink and foreign objects that accumulates. The track should be cleaned whenever dust is visible on the
track walls and rollers, on the documents, or on the images.
Rev. D
:
Tap the power button down 3 times to engage Cleaning Mode (LED Turns
Manual Cleaning
8227 5727-003
Page 19 of 27
Advertisement
Table of Contents
